Most Countries In The World Production Of Bananas?

There are many cities around the world that produce bananas, Bananas is a fruit - producing and delicious. There are a variety of colors and sizes of this fruit, which comes in yellow, green and red.



Usually the size of the banana up to about 4.9 inches in length and 2 inches in width.




Fruit grown bananas among a group of fruit products. Banana is characterized as a calorie-rich fruits, fiber, and supplements, and carbohydrates, nutrition, vitamins, potassium and protein.

Banana benefits
Banana is one of the delicious fruit all over the world, because of its great importance , among other fruits due to the large benefits. There are many countries that produce large quantities of these fruits, which we will talk about them in our article this.

Bananas contain reinforcement cell that prevent infections, is also used in skin and hair problems. Banana helps in the treatment of kidney tumor, glucose, high fever, asthma, nerves and stomach issue, and the sensitivities of others are favorable, and wrinkles.

Defects banana
quantity of excess eating bananas can result in weight gain. One banana per day suitable to benefit without problems. All organic products rich in calories and nutrition and vitamins in the problem of weight gain.

According to some estimates, The most productive fruit of bananas in the list of top ten banana-producing countries in the world's, which are as follows:

The top 10 countries at the top of the banana production in the world
1- India 29.82 million tons ,
2- China 's 11.64 million tons ,
3- Uganda 11.23 million tons ,
4- Philippines 9.45 million tons ,
5- Ecuador 8.24 million tons,
6- Brazil 7.65 million tons,
7- Indonesia 6.34 million tons,
8- Colombia 5.27 million tons,
9- Cameroon 4.94 million tons,
10- Tanzania 4.08 million tons,

The highest producer of bananas in the world?

India is the largest producer of bananas in the whole world, which provide about 29.8 million tons.

Share:

Read More

What's Veto? What Is The Right Of Veto??

The right of veto, we often hear in the political news, the use of state veto power over a particular decision, what is the meaning of the word veto, we'll show you the veto is a Latin word origin, has this word dramatically emerged after World War II ended, and the meaning of the word veto is " I object to, or I do not agree and criticized, "has been appearing after World war II, where the United Nations body which emerged, including the Security Council, and its role was established is to take crucial decisions and important at the international level, and the members of the Security Council is change them all the time, and there five countries have been appointed as the five permanent members, which means that a continuous presence and expressed in the Security Council and the countries that has the right to veto any has the right to veto.

The right to veto, is one of the rights possessed by the great powers in the world, and define more precisely is a unjust rights existing in the Security Council, and the veto power of this which is in the hands of the great powers that use it to serve their interests only, without considering any other considerations, you may lose the Security Council credibility of the whole, as the great powers control the Security Council resolutions, and these countries that control of any decision by the Security Council are the United States, China, Russia, France, Britain, these are the countries controlling the issuance of any decision, as they objected to the any decision is contrary to their interests or the interests of their friends "friendly countries", where you turn the decision without being traded or passed, even, albeit this decision is approved by everyone, as long as these countries have a veto means that it has been pre-empt that decision, and gone forever.

What is meant by a veto:  the veto is a veto from the five permanent members to reject any decision without passage of the Security Council to be voted on, and thus are canceled and not to discuss it and thus failure to perform, and have it to reject one of its five permanent this decision.

We find now there are a number of voices calling for change this unjust exclusion and unfair, as the five countries permanent members use the veto power, resulting in a balance of forces fresh, and injustice is not worthy of the United Nations established the basis for upholding the right, but where the right or justice and Where is the equality in the existence of this right  of others equitably and call it a right of veto, and even if we accept this thought and logic arrogant, there is a major and states with larger states that have permanent membership in the Security Council effect.

The right of veto is no objection to the only decision, it is a miscarriage and termination resolution without irreversible, and this is a major flaw of democracy advocated by the states, and the problem is not in the same resolution, but the method of selecting members of the veto and who are selected by the Security Council and they shall be members or wielding members of the Security Council, they have not been selected, but the election is to form a strong, so many countries have called for the abolition of the right of veto, and demanded that other countries be modified veto system and be included major countries such as Germany, Japan and Brasil.

Do you think that Veto is a miscarriage solution? Leave a comment with all arguments, we will discuss it together

Share:

Read More

What Do You Know About The New Apple Watch 2 ?

Last April 2015, Apple officially disclosure for the new Smart Watch, called Apple Watch for the first time. In record time, this watch became the bestseller in different categories. At now the company show the new product of second generation called Apple watch 2. Do you think that will get all success?

What 's New for Apple Watch 2 ?

It is natural that the Apple made development of the design and the possibilities of the new clock even keep pace with the current progress, and the company has announced that the most prominent additions between these second - generation time is the right design for all sports activities as well as become a time capable at the expense of the user 's heart rate and this also became a watch made of white ceramic resistant to scratches instead of steel.

this time as well as built waterproof and can be used for long periods under water and a depth of up to 50 meters as well as the microphone become water repellent and is also available hourly GPS to determine possible.

Official specifications for smart - Watch: Apple Watch  2: 

- Dimensions: 38.6 × 33.3 × 11.4. 

- Weight: 28.8 grams. 

- Screen: 1.5 - inch. 

- The brightness of the screen: 370X272 pixels. 

- Operating system: Watch OS 3.0. 

- Processor: Dual Dual Core kernel. 

- No external her memory. 

- MP3 music player. 

- battery 273 mm AMP.

Colours of Smart Apple Watch  2: 

this watch will be available in the markets a range of colors , "Silver, gold, gray, white, yellow Options.

The price of smart time Apple Watch Apple Watch 2: 

The price of this Apple Watch 2 will be 420 euros,  will combine with quality, price and usage

What do you think about Apple Watch 2? Will got more success in the world??

Share:

Read More

Electric Scooter: The new BMW C Evolution at the Paris Motor Show

Although the name of the Show "Mondial de l'Automobile in Paris" which start from 1 to October 16, mainly puts the car under the spotlight, it does not put away the other means of transport such as two-wheeled vehicles.

And the mark to the propeller does not count let slip the opportunity without presenting its electric sccoter: the BMW C Evolution. Certainly it is not a first appearance, but this bike has been entitled to nice shots scalpel and new selling points.

Indeed, traffic denser, higher energy costs and the increasingly severe measures governing CO2 emissions throw challenges that electric motor vehicles meet rigorous fulfilling perfectly their contract . Part of the strategy of sustainable development conducted by BMW Group, BMW Motorrad has taken up the topic of electromobility very early, in 2012, in analogy with BMW i in the automotive sector, to then assert his will convincingly with C evolution electric scooter.

With the new C Evolution, which now exists in two versions - Long Range Version (autonomy) and European version - BMW Motorrad hoisted the reference of electric scooters segment to a new level.

Thus, and according to the specialized website sportmoto.com, batteries of a new generation whose cells have a capacity of 94 Ah, like those used on the current BMW i3, offer an extended range of fashion significant.

In addition, standard equipment now includes a new charging cable with a reduced section. New options, such as support for smartphones, flesh out the possibilities to customize the new BMW C Evolution.

In detail, the new C Evolution Long Range displays a continuous output 19 kW (26 bhp), an increase of 8 kW (11 hp) compared with the predecessor, while autonomy, a significant increase has been reach some 160 kilometers away.The maximum speed is 129 km / h (restricted by electronics).

In terms of acceleration from 0 to 50 km / h, the C Evolution displays values ​​equivalent to those of modern maxi scooters with an engine capacity of 600 cm3 or better.

In the European version, the new C Evolution delivers a power of 11 kW (15 hp). Its range is about 100 kilometers, and its maximum speed is 120 km / h. Having regard to the many benefits of this scooter, the idea of ​​seeing presented at the Paris Motor Show in 2016 no longer seems preposterous. She also registered even in the current trend and is targeted more than ever to urban motorists in need of moblité.

The strengths of the BMW C Evolution electric scooter

innovative electric drive system via drivetrain swing arm incorporating an electric motor cooled by liquid, toothed belt and planetary gear. significantly increased battery life with the battery cells with a capacity of 94 Ah instead of 60 Ah far. Long Range Version: continuous power by 19 kW (26 hp) peak power 35 kilowatts (48 hp). Maximum speed 129 km / h. Autonomy approx. 160 km. European Version: 11 kilowatts continuous power (15 hp) peak power 35 kilowatts (48 hp). Maximum speed 120 km / h. Autonomy approx. 100 km. intelligent energy recovery during deceleration and braking. serial charging cable with a reduced section. Reduced charge time possible. performance braking system with ABS. New color scheme Ionic Silver metallic / Electric green. Source: Iliasnotes, aujourd'hui and sportmoto.com

Share:

Read More

USA: More than 500 million pirated Yahoo accounts

The American group "Yahoo!" announced Thursday, September 22, 2016 hacking more than 500 million accounts of its users in 2014.

"Names, email addresses, phone numbers, birth dates, and passwords were among the hacked data," the company said in a statement, adding that the hacking was conducted by a entity related to a state without giving details about it.

The US group, which claimed to have contacted affected users, said it is working closely with the relevant US authorities to determine the circumstances of the computer attack.

He also assured that the investigation found no evidence indicating that the entity in question is currently present in the computer system of "Yahoo!" said the statement of the US company.

This piracy comes following the announcement in July, the redemption of the pioneer of the Internet by the Verizon telecommunications company for $ 4.8 billion.

Source: Iliasnotes.info and Aujourd'hui.ma

Share:

Read More

Industry: iPhone 7 costs three times less the price ? Reason ?

If the price of the iPhone seems exorbitant to you, here are the reasons. Reasons emanating from experienced analysts.

Thus, components and assembly of an iPhone 7 basic cost three times less than its selling price in stores. According to estimates by IHS Markit, 224,80 dollars it takes to manufacture an iPhone 7, 32GB, which will then be sold $ 649 in stores. Analysts IHS indulge every year in this estimate. It takes into account the price of components but also the assembly and testing of products. However, it does not include the costs of research and development, distribution and marketing. Operating margin for Apple is typically around 30%.

Such production costs are in line with those of Samsung products. But the margin Apple remains most important, explains Andrew Rassweiler, head of the study conducted by IHS Markit. "All things being equal, Apple makes more margin than Samsung but the cost of materials is more important than in the past " , he notes. According to IHS, the iPhone 7 is in fact the most expensive to manufacture Apple's history. The iPhone 6S, last year, costing 36.89 dollars less. Involved, a more powerful battery, larger storage capacity or a better camera on the new phone.

Unrivaled for the standard model, the production costs of the iPhone 7 are still lower than the iPhone 6 Plus, released last year. These amounted to 231.50 dollars, 219.80 dollars for the hardware and $ 4.50 for the assembly and testing - 0.50 dollar less mysterious than the iPhone 7. Such estimate has yet been made for the iPhone 7 Plus.

IHS Markit provides the estimated cost of key components, and the identity of their suppliers. The cheapest room phone, produced by Huizhou Desay, would cost only $ 2.50. The processor, it would have a price of 26.90 dollars.Finally, the screen part historically the most expensive, amounts to 43 dollars.

Comparison of materials used for both phones also gives the opportunity to see the replacement of Qualcomm Intel on two components: the base band and the PMIC, useful for optimizing performance. 

A return of Intel on the iPhone.

Source: Aujourd'hui.ma

Share:

Read More

Impact of 3D Printing on Supply Chain and Logistics Industry

Have you heard about 3D printing on the fly from Amazon? The largest Internet-based retailer in the United States and world, Amazon has patented the concept of mobile 3D printing delivery trucks to deliver products even faster to consumer. When a shopper orders a selected product from Amazon, this triggers the nearest truck to 3D print and deliver the product to the consumer, effectively removing the need for any storage.

They 3D printed a complete 6-storey office building in China!
Over the span of 10 years, the price of the cheapest 3D printer came down from USD 18000 to USD 400 and became 100 times faster. All major shoe companies have started 3D printing shoes. In remote airports, spare airplane parts are 3D printed. Cosmetic companies started testing new products on 3D-printed skin instead of animals.

3D printing technology has emerged as one of the most disruptive innovations to impact the logistics industry and the global supply chain. 3D printing technology is impacting professional and our personal lives, with some claim that the technology merely enhances some aspects of production process, while others argue that technology will revolutionize and replace existing manufacturing technologies. Whether revolutionary or evolutionary, 3D printing technology is recognized as an important trend that will significantly impact supply chains. Although, in the private consumer market, expansion of 3D printing is an interesting development in its own right, the biggest potential for disruption lies in industrial applications. It is striking to see how 3D printing will influence supply chains of the future.

Gartner forecasts 3D printer shipments will more than double every year between 2016 and 2018. Overall, end-user spending on 3D printers is expected to increase from USD 1.6 billion in 2015 to about USD 13.4 billion in 2018. McKinsey predicts 3D printing will generate an economic impact of USD 230 billion to USD 550 billion per year by 2025, the vast majority originating from consumer uses and direct manufacturing applications.
Economists have labelled additive manufacturing (a.k.a. 3D printing) the 3rd industrial revolution. Following are the key areas in supply chain and logistics likely to be impacted by 3D printing technology:

1. Rationalization of inventory and logistics: Logistics will adjust to print on demand, eliminating the need to carry inventory
2. Resource efficiency: Material saving during production and ability to utilize recycled materials
3. Customer demand will be met more quickly: Reduction in manufacturing lead time and strategic near-shore manufacturing facility
4. Customization: Tailoring individualized offers to each customer, involvement of client in design, and providing ability to test prototypes
5. Global Logistics: Reduction in cost of international logistics by reducing overseas manufacturing thus decreasing quantity of air and ocean freight and brokerage cost

The supply chain traditional model is founded on traditional constraints of the industry, efficiencies of mass production, the need for low cost, high-volume assembly workers, and so on. But 3D printing bypasses those constraints.
From that point of view, the traditional model stops making senseIt is no longer financially efficient to send products zipping across the globe when manufacturing can be done almost anywhere at the same cost or lower.
However, disruptive technologies come with challenges. Following are challenges for 3D printing:

• IP Issues Authors of digital design templates could be targeted by hackers and incur copyright infringement.
• Security Concerns For example, when printing harmful objects such as a knife, gun etc., which party would be held responsible?
• Liability For example, who is to blame if a 3D product fails: the company printing and selling it, the material supplier, the printing machine manufacturer, or the designer?
• Mass Production It cannot compete with the speed of traditional manufacturing process.

The raw materials today are digital files and the machines that make them. And that demands a new model both for manufacturer and logistics provider.
Forward thinking companies are viewing 3D printing technology from all possible lenses. For example, UPS and DHL have begun to offer 3D printing services. But only time will let us know whether manufacturers turn to their logistics service providers to store and maintain their blueprints or whether this will be a new niche for IT specialists.
Logistics service providers will only be allowed to store and print out the data models if the manufacturers trust them and are prepared to give them the 3D data models. What's certain is that in future, the value of a product will reside in a digital file. Manufacturers will try to protect their IP by inserting copy protections and assigning licensing rights. It is too early to say what the role of the logistics service providers will be in all of this. However, logistics companies have a huge opportunity of becoming a strategic player in the game.
CXOs of supply chain and logistic industry must be aware of the potential impact that 3D printing technology could have on their respective organization and be prepared to react in an agile, flexible, and adaptive manner.

References:

1. http://www.gartner.com/newsroom/id/2887417
2. http://www.mckinsey.com/insights/business_technology/disruptive_technologies
3. https://3dprint.com/46934/amazon-3d-printing-patent/
4. https://www.theupsstore.com/print/3d-printing
5. DHL Trend Research and Technology Innovation Management Review

Source: HCL, Vinayraj Chowhan [Indian scientific writer]
 

Share:

Read More